RIEGL VQ-1560 II-S
Dual Channel Waveform Processing Airborne LiDAR Scanning System for High Point Density Mapping and Ultra-Wide Area Mapping
Airborne Laser Scan System
VQ-1560 II-S
VQ-1560i-DW
VQ-1460
VQ-1260
VQ-880-G II
VQ-880-GH
VQ-580 II-S
VQ-580 II
VQ-480 II
VP-1
VPX-1
VQX-2 Pod
VQX-1 Pod
Airborne Laser Scanners
VQ-1560II-S의 각 채널은 (2개의 스캐너) 직선 평행 스캔 라인을 제공합니다. 두 채널의 스캔 라인이 서로 28도 기울어져 있어 지상에서의 측정값이 지형 높이의 변화에 따라 변하지 않는 최적의 분포를 제공합니다.
RIEGL VQ-1560II-S 시스템 배치도
RIEGL VQ-1560II-S 사양
| Laser Power Level | 100% | |||
| Laser Pulse Repetition Rate (PRR)1) |
2 x 270 kHz | 2 x 500 kHz | 2 x 1000 kHz | 2 x 2000 kHz |
| Max. Measuring Range2)3)4) natural targets ρ ≥ 20 % natural targets ρ ≥ 60 % |
4800 m 7100 m |
3700 m 5600 m |
2800 m 4300 m |
2050 m 3300 m |
| Max. Operating Flight Altitude2)5) (AGL)6) natural targets ρ ≥ 20 % natural targets ρ ≥ 60 % |
3900 m 12800 ft 5800 m 19000 ft |
3000 m 10000 ft 4600 m 15000 ft |
2200 m 7500 ft 3500 m 11500 ft |
1700 m 5500 ft 2700 m 8800 ft |
| NOHD7)9) ENOHD8)9) |
430 m 2950 m |
310 m 2150 m |
220 m 1550 m |
155 m 1050 m |
| Number of Targets per Laser Pulse up to10) | 14 | 14 | 9 | 4 |
| Laser Power Level | 50% | 25% | 12% | 6% |
| Laser Pulse Repetition Rate (PRR)1) |
2 x 2000 kHz | 2 x 2000 kHz | 2 x 2000 kHz | 2 x 2000 kHz |
| Max. Measuring Range2)3)4) natural targets ρ ≥ 20 % natural targets ρ ≥ 60 % |
1500 m 2450 m |
1100 m 1800 m |
780 m 1300 m |
560 m 940 m |
| Max. Operating Flight Altitude2)5)(AGL)6) natural targets ρ ≥ 20 % natural targets ρ ≥ 60 % |
1200 m 900 ft 630 m 450 ft |
4100 m 2900 ft 2100 m 1500 ft |
2000 m 1450 ft 1050 m 760 ft |
6500 m 4800 ft 3400 m 2500 ft |
| NOHD7)9) ENOHD8)9) |
105 m 730 m |
67 m 490 m |
38 m 300 m |
22 m 150 m |
| Number of Targets per Laser Pulse up to10) | 4 | 4 | 4 | 4 |
- rounded average PRR
- Typical values for average conditions and average ambient brightness; in bright sunlight the operational range may be considerably shorter and the operational flight altitude may be considerably lower than under an overcast sky.
- The maximum range is specified for flat targets with size in excess of the laser beam diameter, perpendicular angle of incidence, and for atmospheric visibility of 40 km. Range ambiguities have to be resolved by multiple-time-around processing.
- If the laser beam hits, in part, more than one target, the laser’s pulse power is split accordingly. Thus, the achievable range is reduced.
- Typical values for max. effective FOV 58°, additional roll angle ± 5°
- Above Ground Level
- Nominal Ocular Hazard Distance, based upon MPE according to IEC 60825-1:2014, for single line condition
- Extended Nominal Ocular Hazard Distance, based upon MPE according to IEC 60825-1:2014, for single line condition
- NOHD and ENOHD have been calculated for a typical angular step width of 0.012° (which means non-overlapping laser footprints), and an aircraft speed higher than 10 kn. NOHD and ENOHD increase when using overlapping laser footprints which may be intended e.g. for power line mapping.
- when using online waveform processing
